Intelio Knowledge Base - Belanger Vector & FreeStyler car wash Interface

Intelio Knowledge Base

Available Categories

Other Options

Glossary

Index

General article information

Created	2008-05-30	Views	2865
Modified	2008-05-30	Id	21
Author	Adam Fanello

Main > Activa > Carwash Interfaces

	Print
	Save to list
	E-mail
	Subscribe

Use Activa Direct Arming for the Belanger Vector and FreeStyler car washes.

Activa Direct Settings

In Activa Direct:

Set "Out-Of-Service when" to "Busy Signal Blink or Power Off"
Set "Time to hold Arming Signal" to "15 mins".
Set "Time to wait for wash to begin" to "15 mins"

Interface Wiring

Interface Name	Activa Terminal	Vector	FreeStyler
Arming Output 2	712	X-20	X-18
Arming Output 3	713	X-21	X-19
Arming Output 4	714	X-22	X-20
Arming Output 5	715	X-23	X-22
Arming Output Common	719	B-338 0VDC	B-338 0VDC
Busy/Wash-in-Use Input	720	B-728	B-728
Control Power Input	721	B-340 24VDC	B-340 24VDC
Input Common	722	B-338 0VDC	B-338 0VDC

AUTEC car wash interface
Use Activa Direct Arming for AUTEC car washes. Activa Direct Settings In Activa Direct: Set "Out-Of-Service when" to "Busy Signal Blink or...

Istobal car wash configuration
Use Activa Direct Arming for the Istobal car washes. Activa Direct Settings In Activa Direct: Set "Out-Of-Service when" to "Controller Power...

Futura Car Wash Interface
Use Activa Direct Arming for Futura car washes. Activa Direct Settings In Activa Direct: Set "Out-Of-Service when" to "Busy Signal Blink or...