Bootstrap a previously Offline Configured device
When a device doesn't have Internet access at installation time, the "Offline Configure" shortcut may be run on the desktop to put the system into operation. This pr
- 2011-11-21 - Similar Articles

EPG Installation and User Manual
Introduction The Electronic Payment Gateway (EPG) is a program that runs on a Site Server (sserv7 image) and handles the interfaces with tellers and payment processors. It al
- 2011-01-11 - Similar Articles

Fix Site Server Sys8 Serial Port
The Sys8 Site Servers have a glitch with serial ports 1 and 2. Here are the instructions on how to change COM2 to COM1. Log in as Administrator. Click the Start bu
- 2011-05-24 - Similar Articles

How to configure a new Site Server (sserv) for Cobra
Locked article.

How to configure a new Site Server (sserv) for latest
Locked article.

How to install Cold Card Activator system
Locked article.

How to re-initialize edge virtual machines (VMs)
Locked article.

How to upgrade existing Site Server to WashMax Onsite (Enzo)
The enzo code base includes WashMax Onsite and Intelio Support Scripts. This article explains how to upgrade an existing Site Server to enzo. It could be already running with
- 2011-09-07 - Similar Articles

Select VMware Server Bridged Network Adapter
When setting up an edge VM to bridge to the physical network, you usually only need to configure eth1 on the edge and VMware on the host will automatically select the correct
- 2010-08-31 - Similar Articles

Site Server Flash Imager
The sserv8 Flash Imager drive may be used to initialize a Site Server, Site Controller, or Ryko Code-a-Wash hardware with all of the current software needed for PCI DSS and PA
- 2011-05-03 - Similar Articles