Intelio Knowledge Base

Available Categories

Other Options

Glossary

Index

General article information

Created	2008-11-04	Views	3397
Modified	2011-05-13	Id	60
Author	Adam Fanello

Main > Activa > Troubleshooting

	Print
	Save to list
	E-mail
	Subscribe

The Activa uses the A6 Series bill acceptor from International Currency Technologies (ICT).

Documentation is attached.

For dip switches under front panel of the acceptor must be set to ON OFF OFF OFF.

Dip switches on the side of the acceptor must all be set OFF.

Attachments

	A6-USD4(ENABLE).pdf - Size: 66824
	ICT_Bill_Acceptor_A6-V6share.pdf - Size: 1976965
	A6V6_Installation_Guide.pdf - Size: 1143273

How to reprogram an Activa Bill Acceptor
This procedure describes how to reprogram an Activa bill acceptor. It assumes that the FP-001 Programmer device has already been loaded with the desired firmware program to...

Activa Peripheral Device Documentation
Here are manuals for the peripherals in an Activa. 15.0_NL10276BC30-18C_m02.pdf is for the 15" LCD ActivaDimensions.gif dimensions of an Activa....

Coin Acceptor Troubleshooting
For reference there are three coin acceptor switch settings: The positions for each switch are identified on the moulded plastic housing....