|
|
How to reprogram an Activa Bill Acceptor
|
This procedure describes how to reprogram an Activa bill acceptor. It assumes that the FP-001 Programmer device has already been loaded with the desired firmware program to install. Required parts:
An operational Activa with...
Relevance: 0 | Activa > Hardware Maintenance
|
|
|
Activa Direct Wash Arming
|
Use Activa Direct arming to control the car wash through a direct wired connection to the Activa's I/O terminals.
To Select Activa Direct:
Log into the Activa using the technician login. (The owner...
Relevance: 0 | Activa > Application Configuration
|
|
|
Activa Site Preparation and Pre-Installation Wiring
|
The attached drawings describe the proper positioning of Activa relative to the car wash bay, the site wiring required prior to Activa installation, and how that wiring is connected to Activa during the installation process.
Relevance: 0 | Activa > Hardware Installation
|
|
|
Activa is playing a video about a conveyor
|
Symptom
The Activa tells the customer to wait for the conveyor to move their vehicle through the wash.
Problem
An inappropriate escrow video has been selected.
Solution
At the Activa, log in to maintenance mode....
Relevance: 0 | Activa > Troubleshooting
|
|
|
Activa Operations Manual
|
Download the manual below. You need Adobe Acrobat Reader to view it.
Relevance: 0 | Activa
|
|
|
Activa interface and configuration
|
The Intelio Activa Virtual Attendant has a dedicated section in this knowledge base. Please read the Activa category for information.
Relevance: 0 | WashMax > Teller Interfaces
|
|
|
Activa or CAW not using VPN DNS
|
This article is protected and thus no preview is available.
Relevance: 0 | Support > Networking
|
|
|
How to change activa video to "no pump" version
|
This has been completed. I had the tech block off the lanes VNC'ed into the tellers. Next, exited out of the Activa app, and went to internet explorer. In internet explorer, go to https://systems.intelio.com/tools/Activa/video/ ....
Relevance: 0 | Activa > Application Configuration
|
|
|
How to setup Activa Frequency Code
|
Introduction:
The Activa has Marketing feature called "Frequency Code" that can generate (issue) a new code to a WashMax Marketing Flex Program and print it on a paper receipt. This is typically used to offer a...
Relevance: 0 | Activa > Application Configuration
|
|
|
How to adjust Activa display brightness and contrast
|
Exit the application, to the O/S.
Right click on the Intel Extreme Graphics icon on the task bar. (Blue trapezoid on the far right.)
Click on Graphics Properties .
Click on the Color Correction...
Relevance: 0 | Support
|
