|
|
Activa or CAW not using VPN DNS
|
This article is protected and thus no preview is available.
Relevance: 2.98 | Support > Networking
|
|
|
Nu-Star interface with WashMax
|
Overview
The Nu-Star Comet II model can report a few faults to WashMax via simple relays.
Hardware
The hardware needed is a Kit 108 I/O Relay Board connected to a Serial Device Server such as the Moxa NPort . These can...
Relevance: 2.88 | WashMax > Carwash Interfaces
|
|
|
AUTEC interface with WashMax
|
The WashMax site controller connects with an AUTEC car wash PLC via an adapter called a PPI MultiMaster. This adapter converts the RS-485 signals used by the car wash's PLCs to RS-232. The RS-232 end may be connected directly to an...
Relevance: 2.68 | WashMax > Carwash Interfaces
|
|
|
PDQ car wash interface with WashMax
|
This article is protected and thus no preview is available.
Relevance: 2.56 | WashMax > Carwash Interfaces
|
|
|
Configuring WashMax EPG Reports
|
This article is protected and thus no preview is available.
Relevance: 2.39 | Support
|
|
|
Allied ANDI
|
Source: Allied Electronics Online Documents
Code-a-Wash Settings
Setup Menu / Point of Sale:
Ryko Protocol
9600 Baud
Cable for most companies and POS
ANDI SSC (CH14) RJ45 adapter to the Intelio Site...
Relevance: 2.38 | Site Server > POS Interface
|
|
|
Istobal interface with WashMax
|
This article is protected and thus no preview is available.
Relevance: 2.24 | WashMax > Carwash Interfaces
|
|
|
Wash Select II interface and configuration
|
WashMax can work with the Unitec Wash Select II teller. The Wash Select II and POS 4000 manuals are attached to the end of this article.
Hardware Interface
Configuration a Moxa:
For a Moxa nPort 5110, use a null-modem adapter....
Relevance: 2.21 | WashMax > Teller Interfaces
|
|
|
Belanger interface with WashMax
|
Overview
The Belanger Vector and FreeStyler car wash models offer limited capability to report faults to WashMax. Older WashMax site controller models may connect directly to a Belanger controller via an RS-232 cable. This is out of...
Relevance: 2.21 | WashMax > Carwash Interfaces
|
|
|
Allied NeXGen
|
Source: Allied Electronics Online Documents
Code-a-Wash Settings
Setup Menu / Point of Sale:
Ryko Protocol
9600 Baud
Cable
NeXGen RJ45 adapter to the Intelio Site Server DB9 (Allied Part #N9352-ADP)...
Relevance: 2.18 | Site Server > POS Interface
|
