Intelio Knowledge Base

Main > Activa > Hardware Maintenance  
Hardware Maintenance

Articles
Activa Printer Paper
Intelio does not resell receipt paper. It is available from most office supply stores.For an Activa, buy thermal paper, 2 1/4 inches wide with a 1/2 inch x 5/8 inch core.
- 2011-12-14 - Similar Articles

Bill Acceptor troubleshooting
The Activa uses the A6 Series bill acceptor from International Currency Technologies (ICT).Documentation is attached.For dip switches under front panel of the acceptor must be
- 2011-05-13 - Similar Articles

Bill Dispenser Maintenance
The Bill Dispensers must have routine maintenance to avoid continuous jams and to speed up the process of switching dispensers. The sensors, belts, and rollers get dirty f
- 2009-10-01 - Similar Articles

Card Reader troubleshooting
The Activa uses the MSR280 card reader.  Specifications are attached.Note: Intelio Technologies prohibits the capture of sensitive authentication data for debugging or tr
- 2010-04-28 - Similar Articles

Coin Acceptor Troubleshooting
For reference there are three coin acceptor switch settings: The positions for each switch are identified on the moulded plastic housing. Switch 1: set to MAX
- 2009-11-05 - Similar Articles

Coin Dispenser Troubleshooting
Dip settings:    All four dip switches on the bottom of the hopper should be set to “on”.   This selects ICT protocol using the RS-232 int
- 2008-10-15 - Similar Articles

Custom TG02 printer printing gibberish / wrong baud rate
The Custom TG02 printer can be configured by powering it on while holding both the FEED and REPORT buttons. To do this, login to the Activa, and touch Diagnostics and then Sen
- 2011-12-29 - Similar Articles

Fujitsu FTP627 Printer Quick Reference
See document attached below.
- 2009-03-04 - Similar Articles

How to reprogram an Activa Bill Acceptor
This procedure describes how to reprogram an Activa bill acceptor. It assumes that the FP-001 Programmer device has already been loaded with the desired firmware program to in
- 2008-05-21 - Similar Articles

How to upgrade an Activa software to use the TG02 printer
Exit the Activa application and Exit to OS. Download the files: Open Internet Explorer and download http://systems.intelio.com/repo/Activa/drivers/
- 2011-10-17 - Similar Articles

Powered by KnowledgeBuilder