|
|
AUTEC car wash interface
|
Use Activa Direct Arming for AUTEC car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Busy Signal Blink or Power Off"
Set "Time to hold Arming Signal" to...
Relevance: 47.36 | Activa > Carwash Interfaces
|
|
|
Mark VII AquaJet and GT car wash configuration
|
Use Activa Direct Arming for the Mark VII car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Controller Power Off"
Set "Time to hold Arming...
Relevance: 45.73 | Activa > Carwash Interfaces
|
|
|
Istobal car wash configuration
|
Use Activa Direct Arming for the Istobal car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Controller Power Off"
Set "Time to hold Arming Signal" to...
Relevance: 45.69 | Activa > Carwash Interfaces
|
|
|
Belanger Vector & FreeStyler car wash Interface
|
Use Activa Direct Arming for the Belanger Vector and FreeStyler car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Busy Signal Blink or Power Off"
Set "Time...
Relevance: 44.41 | Activa > Carwash Interfaces
|
|
|
Futura Car Wash Interface
|
Use Activa Direct Arming for Futura car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Busy Signal Blink or Power Off"
Set "Time to hold Arming Signal"...
Relevance: 44.19 | Activa > Carwash Interfaces
|
|
|
Mark VII CombiWash configuration
|
Use Activa Direct Arming for the Mark VII CombiWash.
PLC Settings
Minimum firmware 3.28. On the PLC:
set module 60 (Entry System), parameter 13 to 002 - Wash in use - Extended - Unitec
set module 70 (Special...
Relevance: 41.26 | Activa > Carwash Interfaces
|
|
|
Nu-Star car wash interface
|
Use Activa Direct Arming for Nu-Star car washes.
Activa Direct Settings
In Activa Direct:
Set "Out-Of-Service when" to "Control Power Off"
Set "Out-Of-Service delay" to "10...
Relevance: 37.37 | Activa > Carwash Interfaces
|
|
|
Activa Direct Wash Arming
|
Use Activa Direct arming to control the car wash through a direct wired connection to the Activa's I/O terminals.
To Select Activa Direct:
Log into the Activa using the technician login. (The owner...
Relevance: 36.09 | Activa > Application Configuration
|
|
|
Activa not offering wash code upsells.
|
An upsell, also called upgrade, is when the customer is offered to upgrade to a higher end wash after they have entered a wash code for a lower end wash. Several conditions must be met for the Activa to present the wash package upgrade...
Relevance: 29.5 | Activa > Troubleshooting
|
|
|
How to setup Activa Frequency Code
|
Introduction:
The Activa has Marketing feature called "Frequency Code" that can generate (issue) a new code to a WashMax Marketing Flex Program and print it on a paper receipt. This is typically used to offer a...
Relevance: 10.2 | Activa > Application Configuration
|
